To overclock, there are some requirements to overclock ones of them which became The main concern is processor, motherboard, and memory, because the three this component which will set the limitations overclock. Vga is ones.
In the processor and motherboard, its limitations is the working temperature.
Clock high will increase heat in both components, and to some extent be lead
the computer hangs or even do not want read the hard disk when booting.
For processors, Intel is the processor manufacturer proscribe overclock than AMD that supports the full for business overclock.
In another part of this paper will be presented a variety of tips in choosing a good processor that Intel and AMD. To motherboard look motherboard quality good and can support some kind of bus clock and the multiplier. In addition, look for
the motherboard that has support for various supply voltage CPU.
1.1 volts usually begin until with 2.3 volts with the increase per 0.025.
if board support the supply voltage which is higher than 2.3 volts
for example, is evenbetter, because may be required to overclocking success with increasing supply voltage processors.
Until now the motherboard that a specification as above is the motherboard chipset VIA and N-Force2 / N-Force3. In memory, high bus clock may not be able to follow by RAM.
Increased bus clock will increase reading speed and write to the memory so that if the memory do not support, will occur failure to read and write processes to memory. Step by step must be done correctly,The faster access time (Access time) of a memory, will increasingly supports the bus clock high. Now is their time DDR memory has a clock higher than the memory previous generations.
DDR memory types there are several types.
PC-1600 (133MHz), PC-2100 (266MHz), PC-2700 (333MHz), PC - 3200 (400MHz), and PC-4000 (500MHz) which appeared recently.
PC-1600 (133MHz), PC-2100 (266MHz), PC-2700 (333MHz), PC - 3200 (400MHz), and PC-4000 (500MHz) which appeared recently.